Carbon Dioxide Electroreduction and Formic Acid Oxidation by Formal Nickel(I) Complexes of Di-isopropylphenyl Bis-iminoacenaphthene.

Processing CO2 into value-added chemicals and fuels stands as one of the most crucial tasks in addressing the global challenge of the greenhouse effect. In this study, we focused on the complex (dpp-bian)NiBr2 (where dpp-bian is di-isopropylphenyl bis-iminoacenaphthene) as a precatalyst for the electrochemical reduction of CO2 into CH4 as the sole product. Cyclic voltammetry results indicate that the realization of a catalytically effective pattern requires the three-electron reduction of (dpp-bian)NiBr2. The chemically reduced complexes [K(THF)6]+[(dpp-bian)Ni(COD)]- and [K(THF)6]+[(dpp-bian)2Ni]- were synthesized and structurally characterized. Analyzing the data from the electron paramagnetic resonance study of the complexes in solutions, along with quantum-chemical calculations, reveals that the spin density is predominantly localized at their metal centers. The superposition of trajectory maps of the electron density gradient vector field ∇ ρ r ${\nabla \rho \left({\bf r}\right)}$ and the electrostatic force density field F e s r ${{{\bf F}}_{{\rm e}{\rm s}}\left({\bf r}\right)}$ per electron, as well as the atomic charges, discloses that, within the first coordination sphere, the interatomic charge transfer occurs from the metal atom to the ligand atoms and that the complex anions can thus be formally described by the general formulae (dpp-bian)2-Ni+(COD) and (dpp-bian)2 -Ni+. It was also shown that the reduced nickel complexes can be oxidized by formic acid; resulting from this reaction, the two-electron and two-proton addition product dpp-bian-2H is formed.

Cobalt(II) coordination to an N4-acenaphthene-based ligand and its sodium complex.

A new bifunctional N4-ligand was obtained via the condensation reaction of acenaphthenequinone and 2-picolylamine. A peculiarity of this synthesis is the formation of a new intramolecular C-C bond during the reaction. The structure and redox properties of the ligand were studied. The anion-radical form of the ligand was prepared via the chemical reduction of the latter with metallic sodium as well as in situ via its electrochemical reduction in a solution. The sodium salt prepared was structurally characterized using single-crystal X-ray diffraction (XRD). New cobalt complexes with the ligand in neutral and anion-radical forms were synthesized and further studied. As a result, three new homo- and heteroleptic cobalt(II) complexes were obtained, in which the cobalt atom demonstrates different modes of coordination with the ligand. Cobalt(II) complex CoL2 with two monoanionic ligands was prepared by the electrochemical reduction of a related L2CoBr2 complex or by treating cobalt(II) bromide with the sodium salt. XRD was used to study the structures of all cobalt complexes prepared. Magnetic and electron paramagnetic resonance studies were performed: CoII ion states with S = 3/2 and S = 1/2 were found for the complexes. A quantum-chemical study confirmed that the spin density is mainly located at the cobalt center.

Chemical and Electrochemical Reductions of Monoiminoacenaphthenes.

Redox properties of monoiminoacenaphthenes (MIANs) were studied using various electrochemical techniques. The potential values obtained were used for calculating the electrochemical gap value and corresponding frontier orbital difference energy. The first-peak-potential reduction of the MIANs was performed. As a result of controlled potential electrolysis, two-electron one-proton addition products were obtained. Additionally, the MIANs were exposed to one-electron chemical reduction by sodium and NaBH4. Structures of three new sodium complexes, three products of electrochemical reduction, and one product of the reduction by NaBH4 were studied using single-crystal X-ray diffraction. The MIANs reduced electrochemically by NaBH4 represent salts, in which the protonated MIAN skeleton acts as an anion and Bu4N+ or Na+ as a cation. In the case of sodium complexes, the anion radicals of MIANs are coordinated with sodium cations into tetranuclear complexes. The photophysical and electrochemical properties of all reduced MIAN products, as well as neutral forms, were studied both experimentally and quantum-chemically.

Non-Noble-Metal Mono and Bimetallic Composites for Efficient Electrocatalysis of Phosphine Oxide and Acetylene C-H/P-H Coupling under Mild Conditions.

The present work describes an efficient reaction of electrochemical phosphorylation of phenylacetylene controlled by the composition of catalytic nanoparticles based on non-noble-metals. The sought-after products are produced via the simple synthetic protocol based on room temperature, atom-economical reactions, and silica nanoparticles (SNs) loaded by one or two d-metal ions as nanocatalysts. The redox and catalytic properties of SNs can be tuned with a range of parameters, such as compositions of the bimetallic systems, their preparation method, and morphology. Monometallic SNs give phosphorylated acetylene with retention of the triple bond, and bimetallic SNs give a bis-phosphorylation product. This is the first example of acetylene and phosphine oxide C-H/P-H coupling with a regenerable and recyclable catalyst.

Recent advances in electrochemical C-H phosphorylation.

The activation of C-H bond, and its direct one-step functionalization, is one of the key synthetic methodologies that provides direct access to a variety of practically significant compounds. Particular attention is focused on modifications obtained at the final stages of the synthesis of complicated molecules, which requires high tolerance to the presence of existing functional groups. Phosphorus is an indispensable element of life, and phosphorus chemistry is now experiencing a renaissance due to new emerging applications in medicinal chemistry, materials chemistry (polymers, flame retardants, organic electronics, and photonics), agricultural chemistry (herbicides, insecticides), catalysis (ligands) and other important areas of science and technology. In this regard, the search for new, more selective, low-waste synthetic routes become relevant. In this context, electrosynthesis has proven to be an eco-efficient and convenient approach in many respects, where the reagents are replaced by electrodes, where the reactants are replaced by electrodes, and the applied potential the applied potential determines their "oxidizing or reducing ability". An electrochemical approach to such processes is being developed rapidly and demonstrates some advantages over traditional classical methods of C-H phosphorylation. The main reasons for success are the exclusion of excess reagents from the reaction system: such as oxidants, reducing agents, and sometimes metal and/or other improvers, which challenge isolation, increase the wastes and reduce the yield due to frequent incompatibility with these functional groups. Ideal conditions include electron as a reactant (regulated by applied potential) and the by-products as hydrogen or hydrocarbon. The review summarizes and analyzes the achievements of electrochemical methods for the preparation of various phosphorus derivatives with carbon-phosphorus bonds, and collects data on the redox properties of the most commonly used phosphorus precursors. Electrochemically induced reactions both with and without catalyst metals, where competitive oxidation of precursors leads to either the activation of C-H bond or to the generation of phosphorus-centered radicals (radical cations) or metal high oxidation states will be examined. The review focuses on publications from the past 5 years.

Synthesis of fullerenyl-1,2,3-triazoles by reaction of fullerenyl azide with terminal acetylenes.

Fullerenyltriazoles were synthesized by the interaction of azidofullerene with terminal acetylenes, in which the heterocyclic fragment is directly attached to the fullerene core. The electrochemical studies of the synthesized triazole-containing fullerenes have proved that the potentials of the first reduction peaks are shifted to a less cathodic region compared to unmodified C60. According to theoretical calculations, synthesized fullerene C60 derivatives can be considered as promising acceptor components of organic solar cells.

A Water-Soluble Sodium Pectate Complex with Copper as an Electrochemical Catalyst for Carbon Dioxide Reduction.

A selective noble-metal-free molecular catalyst has emerged as a fruitful approach in the quest for designing efficient and stable catalytic materials for CO2 reduction. In this work, we report that a sodium pectate complex of copper (PG-NaCu) proved to be highly active in the electrocatalytic conversion of CO2 to CH4 in water. Stability and selectivity of conversion of CO2 to CH4 as a product at a glassy carbon electrode were discovered. The copper complex PG-NaCu was synthesized and characterized by physicochemical methods. The electrochemical CO2 reduction reaction (CO2RR) proceeds at -1.5 V vs. Ag/AgCl at ~10 mA/cm2 current densities in the presence of the catalyst. The current density decreases by less than 20% within 12 h of electrolysis (the main decrease occurs in the first 3 h of electrolysis in the presence of CO2). This copper pectate complex (PG-NaCu) combines the advantages of heterogeneous and homogeneous catalysts, the stability of heterogeneous solid materials and the performance (high activity and selectivity) of molecular catalysts.

Composing NLO Chromophore as a Puzzle: Electrochemistry-based Approach to Design and Effectiveness.

A series of D-π-A, D-π-D'-π-A, D-π-A'-π-A nonlinear optical chromophores with vinylene π-electron bridges or bridges with π-deficient/π-excessive heterocyclic moieties along with the corresponding precursors D-vinylene, D-π-D', D'-π-A, D-π-A' and A'-π-A are synthesized and studied both experimentally and computationally. The effect of the heterocycle in the π-electron bridge on the oxidation/reduction potentials and the energy gap (ΔEel ) is investigated in detail. The properties of the D-π-A'(D')-π-A chromophores are shown to correlate with those of building blocks: the oxidation potential is determined by the D-vinylene, and the reduction potential is determined by A'(D')-π-A truncated compounds. The contribution of the acceptor to the oxidation potential of chromophores in comparison with those of the precursors was estimated and analyzed in terms of electronic communication between the end groups. A good correlation between the ΔEel and the chromophores' first hyperpolarizability is revealed.

Electrochemical Insight into Mechanisms and Metallocyclic Intermediates of C-H Functionalization.

Transition metal-catalyzed C-H activation has emerged as a powerful tool in organic synthesis and electrosynthesis as well as in the development of new methodologies for producing fine chemicals. In order to achieve efficient and selective C-H functionalization, different strategies have been used to accelerate the C-H activation step, including the incorporation of directing groups in the substrate that facilitate coordination to the catalyst. In this review, we try to underscore that the understanding the mechanisms of the catalytic cycle and the reactivity or redox activity of the key metal cyclic intermediates in these reactions is the basis for controlling the selectivity of synthesis and electrosynthesis. Combination of the electrosynthesis and voltammetry with traditional synthetic and physico-chemical methods allows one to achieve selective transformation of C-H bonds to functionalized C-C or C-X (X=heteroatom or halogen) bonds which may encourage organic chemists to use it in the future more often. The possibilities and the benefits of electrochemical techniques are analyzed and summarized.

Synthesis, structure, and electrochemical properties of 4,5-diaryl-1,2,3-triphosphaferrocenes and the first example of multi(phosphaferrocene).

The reaction between aryl substituted sodium 1,2,3-triphospholides or disodium bis(1,2,3-triphospholide) and [Fe(η6-(C6H5CH3)Cp]+[PF6]- in boiling diglyme results in pure 1,2,3-triphosphaferrocenes 1-3 or bis(1,2,3-triphosphaferrocene) 4, respectively, in good yields. The structure of all obtained 1,2,3-triphosphaferrocenes 1-4 has been extensively studied experimentally (NMR, UV-Vis spectroscopy, and X-ray analysis for 1 and 4) and quantum chemically. The electrochemical properties of 1,2,3-triphosphaferrocenes 1-4 in the solid state were studied for the first time and a reversible one-electron oxidation (E1/2 = 0.52-0.92 V vs. Fc+/Fc) was demonstrated for 1, 3, and 4. In the case of 1,4-bis(5-phenyl-4-(1,2,3-triphospaferrocenyl))benzene 4, consecutive oxidation in the solid state is observed in contrast to other 1,2,3-triphosphaferrocenes 1-3. According to the ESR data, the g-factor of the oxidized bis(1,2,3-triphosphaferrocene), 4 (g = 2.12) is different from the g-factors of oxidized 1,2,3-triphosphaferrocenes 1-3 (g = 2.01). This is the first example of multi(ferrocenyl) systems based on the phosphaferrocene motif, which in turn opens up a new fundamental platform for the preparation of compounds with stimuli-responsive properties.

Recent advances in metal-organic frameworks for electrocatalytic hydrogen evolution and overall water splitting reactions.

Rational design and synthesis of efficient metal-organic frameworks (MOFs) as electrode modifiers for energy-related electrocatalytic applications are crucial for the development of clean-energy technologies. The present review focuses on recent work on robust earth-abundant heterogeneous catalysts based on pristine MOFs for the hydrogen evolution reaction (HER) and overall water splitting. These catalysts have been extensively studied as alternatives for noble metal-based ones, demonstrating "hydrogen economy" development prospects. In addition, novel strategies to enhance the conductivity, chemical stability and efficiency of MOF-based electrocatalysts are discussed. The best electrocatalysts even surpass the achievements of the platinum group of metals and MOF-derived catalysts in catalytic performance. The electrolytic cells with MOF-modified electrodes demonstrated excellent catalytic activity and can deliver a high current density at a voltage lower than that using the precious metal-based Pt/C cathodes and IrO2 anodes. In this review article, current approaches to design such MOF and MOF-modified electrode materials are summarized and analyzed.

Synthesis and Electrochemical Properties of Fullerenylstyrenes.

An efficient preparative method was developed for the synthesis of previously unreported fullerenylstyrenes based on the reaction of C60 fullerene with terminal acetylenes and EtMgBr in the presence of Ti(Oi-Pr)4. The voltammetric curves of the prepared fullerenylstyrenes were studied, and good prospects for their application as acceptor materials for bulk heterojunction solar cell were demonstrated.

One-Electron Reduction of Acenaphthene-1,2-Diimine Nickel(II) Complexes.

New nickel-based complexes of 1,2-bis[(2,6-diisopropylphenyl)imino]acenaphthene (dpp-bian) with BF4 - counterion or halide co-ligands were synthesized in THF and MeCN. The nickel(I) complexes were obtained by using two approaches: 1) electrochemical reduction of the corresponding nickel(II) precursors; and 2) a chemical comproportionation reaction. The structural features and redox properties of these complexes were investigated by using single-crystal X-ray diffraction (XRD), cyclic voltammetry (CV), and electron paramagnetic resonance (EPR) and UV/Vis spectroscopy. The influence of temperature and solvent on the structure of the nickel(I) complexes was studied in detail, and an uncommon reversible solvent-induced monomer/dimer transformation was observed. In the case of the fluoride complex, the unpaired electron was found to be localized on the dpp-bian ligand, whereas all of the other nickel complexes contained neutral dpp-bian moieties.

Deprotonation of Benzoxazolium Salt: Trapping of a Radical-Cation Intermediate.

The deprotonation of N-2,6-diisopropylphenyl-substituted benzoxazolium tetrafluoroborate 1 with NaH results in the formation of electron-rich diaminodioxaethylene 2. The radical cation salt 2·+·BF4- is found to be an intermediate product in the redox reaction leading from 1 to 2.

One-Electron Reduction of 2-Mono(2,6-diisopropylphenylimino)acenaphthene-1-one (dpp-mian).

The electrochemical characteristics of 2-mono(2,6-diisopropylphenylimino)acenaphthene-1-one (dpp-mian) have been investigated. One-electron reduction of dpp-mian involves the iminoketone fragment, which is revealed by the EPR spectrum obtained after the electrolysis of the dpp-mian solution in tetrahydrofuran (THF). The reduction of dpp-mian with one equivalent of metallic potassium leads to a similar EPR spectrum. The sodium complex [(dpp-mian)Na(dme)]2 (1) produces an EPR signal with hyperfine coupling on the nitrogen atom of the iminoketone fragment of the dpp-mian ligand. Dpp-mian can also be reduced in a one-electron process by SnCl2 ×(dioxane). In this case, complex (dpp-mian)2 SnCl2 (2) is formed, with the tin atom displaying an oxidation state of +4. Tin(II) chloride dihydrate, SnCl2 ×2(H2 O), also reduces dpp-mian, but the two ligands bound to tin in the product form a new carbon-carbon bond between the ketone moieties of the dpp-mian monoanions to form complex (bis-dpp-mian)HSnCl3 (3). Metallic tin reduces dpp-mian to form the (bis-dpp-mian)2 Sn (4) species. Compounds 1-4 were characterized by X-ray diffraction.

Nano-architecture of silica nanoparticles as a tool to tune both electrochemical and catalytic behavior of NiII@SiO2.

The present work introduces a facile synthetic route for efficient doping of [NiII(bpy) x ] into silica nanoparticles with various sizes and architectures. Variation of the latter results in different concentrations of the NiII complexes at the interface of the composite nanoparticles. The UV-Vis analysis of the nanoparticles reveals changes in the inner-sphere environment of the NiII complexes when embedded into the nanoparticles, while the inner-sphere of NiII is invariant for the nanoparticles with different architecture. Comparative analysis of the electrochemically generated redox transformations of the NiII complexes embedded in the nanoparticles of various architectures reveals the latter as the main factor controlling the accessibility of NiII complexes to the redox transitions which, in turn, controls the electrochemical behavior of the nanoparticles. The work also highlights an impact of the nanoparticulate architecture in catalytic activity of the NiII complexes within the different nanoparticles in oxidative C-H fluoroalkylation of caffeine. Both low leakage and high concentration of the NiII complexes at the interface of the composite nanoparticles enables fluoroalkylated caffeine to be obtained in high yields under recycling of the nanocatalyst five times at least.

Silica-supported silver nanoparticles as an efficient catalyst for aromatic C-H alkylation and fluoroalkylation.

The efficient catalysis of oxidative alkylation and fluoroalkylation of aromatic C-H bonds is of paramount importance in the pharmaceutical and agrochemical industries, and requires the development of convenient Ag0-based nano-architectures with high catalytic activity and recyclability. We prepared Ag-doped silica nanoparticles (Ag0/+@SiO2) with a specific nano-architecture, where ultra-small sized silver cores are immersed in silica spheres, 40 nm in size. The nano-architecture provides an efficient electrochemical oxidation of Ag+@SiO2 without any external oxidant. In turn, Ag+@SiO2 5 mol% results in 100% conversion of arenes into their alkylated and fluoroalkylated derivatives in a single step at room temperature under nanoheterogeneous electrochemical conditions. Negligible oxidative leaching of silver from Ag0/+@SiO2 is recorded during the catalytic coupling of arenes with acetic, difluoroacetic and trifluoroacetic acids, which enables the good recyclability of the catalytic function of the Ag0/+@SiO2 nanostructure. The catalyst can be easily separated from the reaction mixture and reused a minimum of five times upon electrochemical regeneration. The use of the developed Ag0@SiO2 nano-architecture as a heterogeneous catalyst facilitates aromatic C-H bond substitution by alkyl and fluoroalkyl groups, which are privileged structural motifs in pharmaceuticals and agrochemicals.

Redox trends in cyclometalated palladium(ii) complexes.

A series of diverse binuclear and mononuclear cyclometalated palladium(ii) complexes of different structure was investigated by electrochemical techniques combined with density functional theory (DFT) calculations. The studies including cyclic and differential pulse voltammetry, X-ray structure analysis and quantum chemical calculations revealed a regularity of the complexes oxidation potential on the metal-metal distance in the complexes: the larger Pd-Pd distance, the higher oxidation potentials. The reduction potentials feature unusually high negative values while no correlation depending on the structure could be observed. These results are in a good agreement with the electron density distribution in the complexes. Additionally, ESR data obtained for the complexes upon oxidation is reported.

A Ni(iii) complex stabilized by silica nanoparticles as an efficient nanoheterogeneous catalyst for oxidative C-H fluoroalkylation.

We have developed Ni(III)-doped silica nanoparticles ([(bpy)xNi(III)]@SiO2) as a recyclable, low-leaching, and efficient oxidative functionalization nanocatalyst for aromatic C-H bonds. The catalyst is obtained by doping the complex [(bpy)3Ni(II)] on silica nanoparticles along with its subsequent electrooxidation to [(bpy)xNi(III)] without an additional oxidant. The coupling reaction of arenes with perfluoroheptanoic acid occurs with 100% conversion of reactants in a single step at room temperature under nanoheterogeneous conditions. The catalyst content is only 1% with respect to the substrates under electrochemical regeneration conditions. The catalyst can be easily separated from the reaction mixture and reused a minimum of five times. The results emphasize immobilization on the silica support and the electrochemical regeneration of Ni(III) complexes as a facile route for developing an efficient nanocatalyst for oxidative functionalization.

Nanoheterogeneous catalysis in electrochemically induced olefin perfluoroalkylation.

Ni-catalyzed electroreductive olefin perfluoroalkylation affords both monomeric and dimeric products depending on the reaction media. Recycling of the catalyst can be achieved by immobilization of a (bpy)NiBr2 complex on silica nanoparticles decorated with anchoring amino-groups. Switching the homogeneous and heterogeneous catalysts is found to be one more factor to control the product ratio. This catalytic technique is both green and atom economical and combines the advantages of nanoheterogeneous catalysis and electrocatalysis.